Digital Display Indicators
A paradigm shift in bridge indicators
Unlike traditional analogue bridge indicators which typically only display one input, DEIF’s XDi range can display two (Dual) or more (Multi) parameters on one TFT graphical LED display screen. The top of the range XDi-N version used in Navigation and Wind applications, allow toggling between up to 4 screens.
Afficheur rétroéclairé polyvalent XDi
Caractéristiques des afficheurs rétroéclairés
- Dalle LED TFT de 3,5, 5 ou 7 pouces
- Plusieurs modèles d’indicateurs virtuels disponibles dans la bibliothèque
- Modèles standard et personnalisés
- Affiche une ou plusieurs valeurs
- Niches d’encastrement DIN de 96, 144 ou 192
- XDi-Net – le raccourci vers CANbus
- Réduction du câblage et du temps d’installation
- Réparations immédiates à bord
- MED et autres homologations pertinentes
Flexible display indicator for navigation applications XDi-N (navigation)
- TFT graphical LED 3.5, 5 or 7" display
- Two CAN ports with CANopen and XDi-net
- Redundant power inputs
- XDi-Net – add multiple XDi indicators
- Up to six NMEA inputs & up to four outputs
- NMEA data offset and averaging functions
- Dimmer controllable using front/external pushbuttons, analogue, NMEA or CAN/XDi-net.
- 3 level priority data fall-back function
- True wind data calculation
- Calculate magnetic or true heading
- XDi-net group dimmer and day/night colour shift
- Toggle between up to four predefined indicator screens using the mode function
- Quick-switch between measuring units either locally or for the entire system
- Customised indicator designs available on request
- Standard day and night designs, dusk on request
- Optional analogue or digital inputs
- Optional warning and alarms/relay output
- MED and other relevant class approvals
Flexible display indicator for wind and weather applications XDi-N (wind)
- TFT graphical LED 3.5, 5 or 7" display
- 96, 144 or 192 DIN cutouts
- Two CAN ports for easy interfacing
- XDi-Net – add multiple XDi indicators
- Redundant power inputs
- Compatible with wind sensors providing NMEA data (such as DEIF’s ultrasonic wind sensors)
- Up to six NMEA compatible inputs
- Up to four NMEA outputs
- Relative, true & geographic wind indication
- Toggle between up to four predefined indicator screens
- Quick-switch between wind speed measuring units (knots, m/s or m/h, km/h, beaufort)
- Dimmer controllable using front/external push-buttons, analogue, NMEA or CAN/XDi-net
- Standard day and night designs
- Customised indicator designs available on request
- Optional analogue or digital input
- Optional wind warning and alarms/relay output
- Optional IP66 protection
Revolution Counter XDi-D (Revolution Counter)
- Calculate absolute RPM and % RPM in single or bi-directional systems.
- Direct connection to an inductive pickup or similar pickup providing a digital on/off or open/closed signal.
- Quick setup and configuration via XDi menu
- Add multiple Revolution Counter repeaters via XDi-Net
- Revolution counter start value adjustable in case of retrofit installation
- TFT graphical LED 3.5, 5 or 7" display
- 96, 144 or 192 DIN cutouts
- Two CAN ports for easy interfacing
- Redundant power inputs
- Dimmer controllable using front/external push-buttons, analogue, NMEA or CAN/XDi-net
- Customized indicator designs available on request
- Optional IP66 protection
- Accumulates revolutions over time (up to 99 999 999 rev. after that is starts from 0 again)