Multi-line 2 Utility Software v.1.x.

Multi-line 2 Utility Software v.1.x.

You have chosen to download our software.

Within a few seconds, you will receive an email containing a download link.

Having trouble using the software? Please contact support@deif.com. 

Best regards, 

DEIF A/S

The software is subject to copyright DEIF A/S
By following the above mentioned link and downloading the file you automatically accept DEIF A/S copyright and license agreement (EULA). The license agreement can be found on www.deif.com/software

1.43.0

This software applies to the following DEIF products:

  • Multi-line 2 - AGC v.2.xx
  • Multi-line 2 - GPC v.2.xx
  • Multi-line 2 - GPU v.2.xx
  • Multi-line 2 - PPU v.2.xx
  • Multi-line 2 - BGC
  • Multi-line 2 - MDR
  • Multi-line 2 - EC-1/GC-1
  • Multi-line 2 - PPM v.2.xx
  • Multi-line 2 - AGC v.1.xx

New features:

  • Inclusion of an EULA in the installation script.
  • Option N configuration tool added to the software package (launchable from USW 1)

Changes:

  • Support for Gempac 2.60.01.43.0

1.43.0

26/04/2013

This software applies to the following DEIF products:

  • Multi-line 2 - AGC v.2.xx
  • Multi-line 2 - GPC v.2.xx
  • Multi-line 2 - GPU v.2.xx
  • Multi-line 2 - PPU v.2.xx
  • Multi-line 2 - BGC
  • Multi-line 2 - MDR
  • Multi-line 2 - EC-1/GC-1
  • Multi-line 2 - PPM v.2.xx
  • Multi-line 2 - AGC v.1.xx

New features:

  • Inclusion of an EULA in the installation script.
  • Option N configuration tool added to the software package (launchable from USW 1)

Changes:

  • Support for Gempac 2.60.01.43.0

1.42.0

07/10/2011

New features

  • USB driver for 64 bit Windows XP, Vista or 7.

Changes

  • Trending and data tracer improvements.
  • Improved support of serial to tcp-ip converter.
  • Irrelevant log columns not included when exporting logs to an Excel file.
  • Alarm entries updated correctly after Logs retrieva

1.41.0

02/09/2010

  • Support of “Special VG” 2.32.0

1.40.44

01/09/2009

New features:

  • Data tracing of VDO measurements added for BGC units

Changes:

  • Other minor adjustments 

1.40.23

18/02/2009

  • Configuration files updated for EC-1/GC-1 (”remote start pulse” issue fixed) 
  • Trending improvements 
  • Value rounding issue for parameters setpoint fixed 
  • Scaling of plant view instruments improved for high voltage values 

1.40.116

15/07/2008

New features:

  • New BGC 2.32.0 parameters
  • Views for ADEC support 

1.4.0.115

27/03/2008

  •  Support for additional parameters.

1.4.0.114

11/01/2008

  • Writing of parameters to BGC versions 2.10.0 – 2.31.3 updated.

1.4.0112

04/12/2007

  • Support of PPM 2.52

1.4.0.111

14/05/2007

New features:

  • Ec-1/GC-1 new digital input function, remote puls start
  • EC-1/GC-1 new digital input function, remote puls stop
  • EC-1/GC-1 new relay output function, auto mode indication

Changes:

  • Updated PPM parameterfile.
  • Updated GPU parameterfile
  • Updated BGC parameterfile

1.4.0.109

01/02/2007

Changes:

  • Support of OEM customer updated.

1.40.106

16/10/2006

New feature:

  • Configuration of N option added.
  • Option EF5 added.
  • Option A4 handling updated.

1.40.105

26/09/2006

New feature:

  • Support of GC-1 customised products 

1.40.102

22/08/2006

New feature:

  • Support of PPU/GPC with synchronization of gen-set over step-up-transformer

1.40.92

02/08/2006

Changes:

  • EC-1 / GC-1 parameter file updated
  • GC-1 Plant view updated
  • BGC M-Logic command adjusted

1.40.98

06/06/2006

New features:

  • USW support of USB connection.

Changes:

  • Configurable input "MB spring load" and "GB/TB spring load" supported for AGC.
  • Parameter file updated for AGC.
  • Initial USW connection sequence modified

1.40.94

27/03/2006

Changes:

  • Updates made in MLogic for AGC.

1.40.93

08/03/2006

Changes:

  • BGC parameter file updated.
  • Frequency scaling for EC-1 / GC-1 updated.
  • Input / output function updated.

1.40.91

12/01/2006

New features:

  • Auto reset added for BGC 2.20.0 (Self-acknowledge)
  • Number of languages to download in the ML-2 unit can be selected by the user. Support for BGC 2.20.0 and later. Support for AGC / AGC Mains 2.33.0 and later.
  • Printout for views, inputs, outputs, mlogic.
  • Support for PPM. 

Changes:

  • Consistency check updated.
  • Printout of parameters updated.
  • M-Logic updated.
  • View download updated.
  • Various parameter-, Input-, Mlogic- and view-files updated.

1.40.86

29/11/2005

Changes:

  • EC-1 / GC-1 parameterlist updated.
  • Plant view for EC-1 / GC-1 updated.
  • Translation symbol table added for AGC 2ce.
  • Boot mode download for EC-1 / GC-1 updated.
  • Consistency check and parameter download updated.
  • Download of MLogic files updated.
  • AGC xml files updated.
  • Download of GSM phone numbers updated.

1.40.82

03/11/2005

New features:

  • Support for AGC 2ce
  • Support for CAN IO Box

Changes:

  • BGC parameterlist updated.
  • BGC analogue input 1-4 readings added.
  • BGC MLogic updated.
  • BGC Input "Reset analogue Gov." renamed to "Reset ana. GOV/AVR".

1.40.80

05/10/2005

New features:

  • Support for GC-1
  • Support for EC-1 option H1

Changes:

  • BGC parameterlist updated.
  • Data Tracer updated.
  • Updates for AGC 2.3x.x

1.40.65

04/07/2005

New features:

  • Support for EC-1
  • Configurable outputs added
  • Cable supervision added
  • Support of MDR-2 Option C4 block protection added

Corrections:

  • Pointer graph on Plant view updated

1.40.66

04/05/2005

Changes:

  • Adjustments regarding storing of parameter file made
  • Power graph on plant view updated for ML-2 AGC

1.40.57

02/02/2005

New features:

  • Updated to support BGC 2.00.0
  • Handling of AGC 1.50.0 and older updated.

1.40.55

14/01/2005

New features:

  • Option M13 2 added for BGC
  • MAN and BLOCK mode selection added for AGC in MLogic.
  • MLOGIC version 1002 needed to obtain functionality.
  • Option H5 and H6 for AGC added
    Support new features in AGC regarding mode and absolute versus relative running hour calculation

Changes:

  • Configuration of input for standard ML2 improved

1.40.48

30/11/2004

New features:

  • Support of AGC 2.10

Changes:

  • Other minor adjustments

1.40.37

21/06/2004

New features:

  • BGC interface extended

Changes:

  • Option dependencies adjusted
  • Option Y4 added to BGC
  • Option H4 settings adjusted

1.40.36

05/05/2004

New features:

  • Configurable inputs added for AGC Mains
  • More digital inputs available for MLogic

1.40.35

14/04/2004

New features:

  • Support of new comm. options added (H6 Cummins Engine Interface Communication (EIC) and H5 CAN EIC)
  • Update button for I/O status implemented

Changes:

  • Adjustments for support of Std. Application version 2.30
  • Adjustments for support of AGC application version 2.00
  • Minor text changes

1.40.29

19/01/2004

Changes

  • Option M20 is supported for PPU/GPC
  • Handling of "Block loss of mains" configuration
  • Default communication port is set to no. 1
  • Date format is matching ML-2 display format
  • Possibility for re-use of old parameter-file extended
  • Text in edit dropdown box changed from 'relay' to 'output'
  • Logic configurations possibilities extended
  • Possibilities for configuration of views are extended for the BGC
  • Extensions for support of new functions in BGC is added

1.40.26

27/11/2003

Changes:

  • Handling for Texts for engine comm. in BGC added
  • Viewing MDR-2 data is improved
  • AGC Option A2 is corrected
  • Option matrix is trimmed
  • Menu 4960 added for voltage trip
  • Spelling of 'Emergency' changed
  • Parameters for AGC option C2 is added

1.40.19

30/07/2003

  • Support of MDR-2 added
  • BGC interface extended
  • Parameter file for PPU software adjusted
  • Added energy measurement to views
  • Inhibit-configuration functionality extended for some products

1.40.14

06/07/2003

  • Some ‘View’-possibilities are changed
  • BGC functionality adjusted 

1.40.9

03/06/2003

Changes:

  • XML files updated
  • Prepared for handling BGC applications

1.40.6

27/05/2003

Changes:

  • XML files updated
  • Parameter file for PPU/GPC/GPU applications changed

1.40.5

23/05/2003

New features:

  • Failclass is supported for AGC-products
  • RUN as enable-parameter implemented for AGC-products
  • Parameter list updated for AGC-products

1.40.0

02/03/2003

New features:

  • Performance improved regarding PPU/GPU/GPC
  • Layout adjusted for PPU/GPU/GPC

1.30.84

11/10/2002

New features:

  • Performance improved regarding PPU/GPU/GPC

1.30

25/09/2002

New features

  • All ML-2 units are now supported (AGC+PPU+GPU+GPC)
  • Improved trending
  • Improved option handling
  • Improved IO-handling
  • Improved user interface 
  • Version Info -file added.
  • Settings files updated - must be reinstalled.

1.22

09/04/2002

New features:

  • Ready for new feature in ml-2 std ver 1.60.x

Corrections:

  • Problem with download under Win95/98 has now been fixed.

1.20

21/11/2001

New features:

  • Ready for option EF
  • Font in print changed to ANSI_FIXED_FONT
  • Edit of view windows.

1.10

12/10/2001

New features:

  • Handling of option M1
  • Print function
  • Double click on a '.ml2' file opens the file
  • Restore window size when started

1.03

22/08/2001

New features:

  • Can handle timers with 1/100 resolution.
  • New I/O dialog.
  • Ready for options in std. V 1.45.

On this page, you can download software updates for your product(s) and help yourself to various utility tools and add-ons that will assist you in setting up, detecting faults and configuring your product(s).

Please be advised that not all of our products can be updated by the user. Nor do all of our products come with a utility tool. Consequently, the list on this page cannot be considered an overview of our product programme.

DEIF will register your download along with the used e-mail address for the purpose of sending out information on future updates, if requested.

DEIF cannot be made responsible for any consequences of failed product updates or use of utility tools. Nor can DEIF A/S be made responsible for consequences of changes in behaviour of products due to a software upgrade. It is always the responsibility of the user to ensure correct set-up and configuration before commissioning. Please study the version log of the software before updating the product.

Licence agreement for software downloaded from www.deif.com

Downloaded software remains the property of DEIF. The software may not be distributed for commercial purposes, changed or reused in full or in part or sold to any third parties.

The latest versions for full functionality

As always, we recommend that you install our offered improvements to fully utilise your DEIF product.

All improved software can be downloaded at your convenience at www.deif.com under “Software”.

Should you have any questions or experience problems finding the relevant software for your product, please feel free to call DEIF A/S at +45 96149614 or your relevant local DEIF office. Alternatively, we are always ready to assist you, if you send an e-mail to support@deif.com.