Formation

Avec l’évolution rapide du contrôle des générateurs et la sophistication dans la communication moteur

Choose country

AGI

Designer level Read more
22/10/2019
Skive, Denmark
EUR 425
Available
Register Read more

AGI

  • This training course is for designers who require detailed knowledge of the DEIF controllers capabilities in order to make the right offer to meet application requirements.Designers will learn how to specify a genset controller with regards to option selection, how to design an application for DEIF controllers and how to setup advanced power management applications.

Your outcome

  • You will learn how to use the technical documentation as a tool for option selection to meet application requirements
  • Through practical exercises, you will learn to setup advanced power management applications using DEIF Utility Software
  • Via hands-on training you will gain knowledge about different modes of operation in power management applications
  • You will learn to emulate an entire application though practical application and function training
Register Close

DVC 310

Read more
22/10/2019 - 23/10/2019
Skive, Denmark
EUR 850
Available
Register Read more

DVC 310

With the rapid advances in generator control and the increasingly sophisticated communication between engines themselves, it has become more necessary than ever for operators and service personnel to receive hands-on training.

DEIF is committed to ensuring that our customers are provided with the information and resources necessary for the efficient use of our products. To that end, we offer formal training for you and your associates to help you learn how to use DEIF generator controllers and software appropriately on our simulation equipment around the world.

Your outcome

You will learn to set up and troubleshoot DEIF’s digital voltage regulator DVC 310. You will get an introduction to the DVC 310 hardware and the EasyReg PC configuration software. You will learn the different modes of the DVC 310 and how to use them, and how to interface to the DVC 310.
The two-day training is performed as a classroom training and contains both a theoretical part and practical hands-on training.

Register Close

PPU 300

Operator/Service Read more
29/10/2019 - 30/10/2019
Skive, Denmark
EUR 850
Available
Register Read more

PPU-300

On this two-day training course, you will get the necessary knowledge to carry out daily routine operations. After you have become familiar with the key functions of the controller, you will move on to more advanced tasks aimed at service technicians and engineers.

The course will involve practical tasks related both to the primary functions of the controller, but also more advanced tasks aimed at setting up, troubleshooting and commissioning typical genset applications.

Your outcome

  • You will learn the basic menu functions of the genset controller and become acquainted with the menu structure
  • You will learn how to use the controller and obtain in-depth knowledge of the functionality it offers.
  • You will learn how to use the different configuration inputs, modes of operation and how to change protection settings.
  • You will learn how to connect the utility software, configure I/O’s, parameter settings etc.
 
Register Close

PPU 300

Codesys Read more
31/10/2019
Skive, Denmark
EUR 425
Available
Register Read more

PPU 300

The PPU 300 (CODESYS) training course will provide you with tools and knowledge on how to use the PPU 300 in a CODESYS application. The training includes various hand-on sessions and will enable you to make customised project solutions.

Register Close

PPU 300

Operator/Service Read more
12/11/2019 - 13/11/2019
Skive, Denmark
EUR 850
Waiting list
Register Read more

PPU-300

On this two-day training course, you will get the necessary knowledge to carry out daily routine operations. After you have become familiar with the key functions of the controller, you will move on to more advanced tasks aimed at service technicians and engineers.

The course will involve practical tasks related both to the primary functions of the controller, but also more advanced tasks aimed at setting up, troubleshooting and commissioning typical genset applications.

Your outcome

  • You will learn the basic menu functions of the genset controller and become acquainted with the menu structure
  • You will learn how to use the controller and obtain in-depth knowledge of the functionality it offers.
  • You will learn how to use the different configuration inputs, modes of operation and how to change protection settings.
  • You will learn how to connect the utility software, configure I/O’s, parameter settings etc.
Register Close

PPM 300

Operator/Service Read more
14/11/2019 - 15/11/2019
Skive, Denmark
EUR 850
Waiting list
Register Read more

PPM-300

On this two-day training course, you will get the necessary knowledge to carry out daily routine operations. After you have become familiar with the key functions of the controller, you will move on to more advanced tasks aimed at service technicians and engineers.

The course will involve practical tasks related both to the primary functions of the controller, but also more advanced tasks aimed at setting up, troubleshooting and commissioning typical genset applications.

Your outcome

  • You will learn the basic menu functions of the genset controller and become acquainted with the menu structure
  • You will learn how to use the controller and obtain in-depth knowledge of the functionality it offers.
  • You will learn how to use the different configuration inputs, modes of operation and how to change protection settings.
  • You will learn how to connect the utility software, configure I/O’s, parameter settings etc.
 
Register Close

AGC

Service level Read more
26/11/2019 - 27/11/2019
Skive, Denmark
EUR 850
Few seats left
Register Read more

AGC

  • This training course is for service technicians and engineers who commission and troubleshoot genset operations.

Your outcome

  • You will learn how to use the different configuration inputs, modes of operation and how to change protection settings.
  • You will learn how to use the controller and obtain in-depth knowledge of the functionalities it offers.
    This course will involve practical tasks related to the basics from the level 1 course. Next, you will be instructed how to access the menus from the front panel display screen to activate, commission and troubleshoot typical applications. Input from you on your typical applications further build these skills.
  • You will learn how to connect the utility software and configure I/Os, parameter settings, and additional operator panels (AOP). This will also involve tuning of PIDs, synchronisation and using the utility software as a troubleshooting tool.
Register Close

Avec l’évolution rapide du contrôle des  générateurs et  la sophistication dans la communication moteur, il est devenu indispensable pour les opérateurs ainsi que pour le personnel de mise en service de se former sur ces nouvelles technologies.

DEIF s’engage à veiller à ce que ses clients reçoivent les informations et les ressources nécessaires pour une utilisation efficace de ses équipements. DEIF disposent de plusieurs centres de formation localisés dans le monde entier, tous équipés de bancs de simulation avec de vrais générateurs, afin de vous garantir une formation complète dans l’utilisation de nos contrôleurs et de leurs logiciels.

Apprentissage par la pratique  sur des équipements de simulation flambants neufs

Toutes les sessions de formation sont effectuées en petits groupes, ce qui offre une grande souplesse dans la gestion de la formation.  Il est alors possible de  tester sur nos bancs  de simulation,  un large éventail de conditions de défaut sans risque pour l’installation, dans un environnement propre et sans danger.

 

Actualités

Vous cherchez un logiciel, de la documentation, ou un livre blanc?

Caractéristique unique de DEIF depuis des décennies, nous proposons un accès gratuit et sans restriction aux mises à jour de logiciel, à une documentation technique détaillée par produit, ainsi qu’à des livres blancs instructifs et stimulants sur des sujets de demain ayant trait à l’industrie.

Contacts

Tél:

Fax:

Email:

Marché

Heures d’ouverture

Service