Select your business area

We use this information to provide content associated with segment of your choice.
You can change your selection any time.

TDU 107 Extended

Ce logiciel concerne les produits DEIF suivants :

Vous allez télécharger 1.3.3.2

Les principales modifications depuis la dernière version sont les suivantes:

Supported on AGC-4 DG and AGC-4 Mains.
Minimum AGC-4 SW required: 4.74.3.
Recommended minimum AGC-4 SW: 4.76.1.

Changes:

  • Added extended search for renamed software packages. This means that sw releases for TDU newer than 1.3.3.1 will include version number.  

Corrections:

  • Fixed firmware ver. 1.3.3.0 connection problems.
  • Fixed DVC types on the parameter page.
  • Fixed problems with parameter scaling and drop-down elements on the parameter page and in the usw dialogue.
  • Fixed missing drawings of single DG on the supervision page.

Ver. Date Description

1.3.3.2

14/11/2020

Supported on AGC-4 DG and AGC-4 Mains.
Minimum AGC-4 SW required: 4.74.3.
Recommended minimum AGC-4 SW: 4.76.1.

Changes:

  • Added extended search for renamed software packages. This means that sw releases for TDU newer than 1.3.3.1 will include version number.  

Corrections:

  • Fixed firmware ver. 1.3.3.0 connection problems.
  • Fixed DVC types on the parameter page.
  • Fixed problems with parameter scaling and drop-down elements on the parameter page and in the usw dialogue.
  • Fixed missing drawings of single DG on the supervision page.

1.3.3.0

10/09/2020

Supported on AGC-4 DG & AGC-4 Mains.
Minimum AGC-4 SW required: 4.74.3.
Recommended minimum AGC-4 SW: 4.76.1.

New features:

  •    Further brandings are added.
  •    AGC-4 as clock master is added.

Changes:

  •    New entry point for the ECU measurement window is added.

Corrections:

  •    Parameter max. value was not taken into account for text values.
  •    If exactly 9 alarms were present, the last one was not visible.
  •    Possibility to include system information when exporting a TDU.config file is added.
  •    Preventive measures were taken to stabilize the VNC connection.
  •    Generator measurements are removed from mains TDU.
  •    Regeneration parameters are added to TDU.
  •    Application supervision now supports mains with id´s 1-16 and DG´s with ID 17-32.
 

1.3.2.0

17/06/2020

Supported on AGC-4 DG & AGC-4 Mains.
Minimum AGC-4 SW required: 4.74.3.
Recommended AGC-4 SW: 4.76.1.

New features:

  • EIC measurements can now be seen in a separate window.
  • Added support for new Boolean measurements.

Changes:

  • More texts have been included in the translation file, to extend translation capabilities of the TDU. (Controller texts and Engine DM1/DM2 texts).
  • Sync shortcut on the home screen now only requires a single press instead of a long press.
  • Internal references to measurement layout on Modbus have been updated.
  • Preferred font have been removed from the CSV file.

Corrections:

  • Current status of the DG on the alternator curve now works properly.
  • TDU Supervision is now updated correctly when using the Easy connect feature.
  • Empty AOP texts are now saved during power cycle or in TDU.config files.
  • "Autojump to sync scope" is now saved during power cycle or in TDU.config files.
  • The screensaver now shows the "Connection lost" message.
  • The branded splash screen is now shown correctly.

1.3.1.0

19/02/2020

Supported on AGC-4 DG & AGC-4 Mains.
AGC-4 SW required: 4.76.1.

New features:

  •    Control panel instruments can now be custom scaled by pressing and holding for 3 seconds.
  •    All voltage selections in parameter 9030 are now supported.
  •    Access lock implemented; when the input is configured and active in the controller all settings are read only in the TDU.
  •    New screen is added with current measurements shown graphically.
  •    M-logic command "Inhibit. mode button" is now reflected in the TDU.
  •    It is now possible to add a separate password for control panel instruments under "Permissions".
  •    Fuel level is now shown in the top bar, if parameter 10980, 10990 or 11000 is set to "RMI fuel level" via the utility software.
  •    Running hours is now shown in the top bar, if connected to a genset controller.
  •    Parameter shortcut is added on the control page; it can be enabled/disabled under "Display settings".
  •    Power Management ID and priority are added to the home screen, when connected to a genset controller.
  •    Auto Jump to Synchroscope page is added; it can be enabled/disabled under "Display settings".
  •    Import/ Export: It is now possible to load a configuration file from an older software version.

Changes:

  •    20 pages are now available in the instrument panels on the control page.
  •    Lists of instrument measurements have been expanded.
  •    User access level filtering on the parameter page have been removed.
  •    DM1/DM2 texts have been expanded.
  •    When connected to a German AGC-4 with V0108 option, the manual button is removed.

Corrections:

  •    Language management create export has been corrected, when specific German characters are used in the controller translation.
  •    Visibility of the DM1 top icon has been corrected.
 

1.3.0.1

23/09/2019

Only supported on AGC-4 DG & AGC-4 Mains.
Minimum AGC-4 SW required: 4.74.3.

Corrections:

  • Corrected: AOP shortcut on control panel page.
  • When changing mode, the confirmation dialogue now always pops up.

1.3.0.0

12/09/2019

Supports AGC-4 DG & AGC-4 Mains controllers.
Minimum AGC-4 SW required: 4.74.3.

New features:

  • Support of AGC-4 mains controller.
  • Import/export of following settings via USB:
            - Meters on homepage
            - Password levels
            - AOP texts
            - All settings under "Display config" 
  • Added "Connection to controller" text on start-up screen.

Changes:

  •    TDU backlight timeout introduced.
  •    Fixed sporadic communication timeout messages on TDU.
  •    Extended number of status texts on the TDU.

Corrections:

  • Fixed screensaver freeze issue.
  • Corrections to some status texts.
  • Fixed rare initial communication issues.
  • Create new master language function corrected

1.2.2.0

19/06/2019

Only supported on AGC-4 DG.
Minimum AGC-4 SW required: 4.72.0.

Changes:

  • Internal production handling updated.

1.2.1.0

12/06/2019

Only supported on AGC-4 DG.
Minimum AGC-4 SW required: 4.72.0.

New features:

  • Implementation of offline USB update of TDU
  • Added scrolling on supervision page
  • Added hardcoded master password to DM1/DM2 clear button
  • Enhanced user feedback during restart of TDU
  • Added new EasyConnect text: "DG Ready to be added"

Changes:

  • Improved connection stability between TDU and AGC-4 controller
  • Change scaling of Fuel rate measurement

Corrections:

  • Correct Modbus offset for escape mode timer
  • Improved stability of auto connect feature
  • Added missing password prompt to AOP shortcut on home screen
  • Fixed misplaced buttons in control panel

Comme toujours, nous recommandons que vous installiez nos améliorations proposées pour optimiser l’utilisation de votre produit DEIF.

Tous les logiciels améliorés peuvent être téléchargés quand vous le souhaitez et gratuitement sur www.deif.com sous "Software" puis "Software Download".

Si vous avez des questions ou des difficultés à trouver le logiciel correspondant à votre produit, n’hésitez pas à contacter DEIF A/S au +45 96149614 , ou votre agence DEIF. Sinon, nous sommes toujours prêt à vous venir en aide par e-mail au support@deif.com.